The table size of this 4x8 cnc router 1325 is also called 3-axis CNC wood milling machine. The popular working size is 1325 (1300 x 2500 cm), suitable for the wooden industry, furniture industry, technical research, advertising design, art creation and hobbies. 1. The 4x8 cnc milling machine has a large working area and is designed for large-scale engraving work, such as wooden industry, architectural model making, PCB, advertising signs, artworks, crafts, aircraft models, MDF, etc. 2. The use of adjusting screw design can help adjust the height at the same level to maintain the processing accuracy. 3.The gantry is welded with 8mm thickened square tube. Accuracy is within 0.02mm. More than 90% higher than the manufacturing level of peers. 4.Gantry thickness 8mm. Using heavy-duty columns. Ensure that the machine body is stable during high speed and heavy cutting without jitter. Widely used in wood carving, wood carving, bamboo carving, bamboo carving, marble carving, marble cutting, two-color acrylic carving, two-color acrylic cutting, plastic carving, plastic cutting and copper, copper, aluminum and other metal carving, aluminum carving. It can also be used for lettering, embossed and embossed characters, etc.

The advantage of the vacuum adsorption table is that even irregular plates can be tightly fixed on the surface of the engraving machine. There is no vibration affecting the engraving effect during the engraving process. Obviously, the vacuum adsorption table will be to some extent. Improve the precision of engraving, especially for relatively thin or lighter or irregular plates. After being fixed with a jig, it may still cause small displacement due to machine vibration during engraving, which affects the precision of engraving, and the vacuum adsorption table is very A good solution to this problem. The vacuum adsorption table is connected by a vacuum pump to the bottom of the woodworking engraving machine. There are a plurality of adsorption holes on the surface of the engraving machine. When we put the board on top, the board is firmly absorbed by the vacuum generated by the vacuum pump. On the countertop, the engraving machine starts working at this time, and the whole loading and unloading process is no more than ten seconds, which is efficient and fast. Ideal for line carving of wooden doors and panel furniture. However, vacuum-adsorbed countertops are not perfect for any wood, or there is no perfect thing in the world. The so-called perfection is relative. The material that is not suitable for the vacuum adsorption table is thick and heavy. The plate itself is heavy enough to absorb it, and it is difficult to absorb it. It only needs to be fixed by the clamp to ensure that the displacement that does not affect the engraving precision will not occur. The table was vacuum-adsorbed. Another kind of material that is not suitable for vacuum adsorption table engraving machine is the material that needs to be cut or hollowed out. This is not a problem of material itself, but there is no way to vacuum after cutting and hollowing out. Naturally, there is no way to say anything. Vacuum adsorption, but there is a compromise, that is, put a thin layer of MDF on the table, which can solve the problem of vacuum adsorption of cutting and hollow carving to some extent.

The CNC machining center (automatic tool change engraving machine) uses the tool magazine to realize the tool change. This is the tool change method that is widely used in the machining center. There are many types of tool magazines. There are two types of tool magazines: disc type and chain type (straight type). The tool changer is changed according to whether there is a robot involved in the tool change process, and it is divided into two cases: a robot change tool and a no robot change tool. In the process of changing the tool by a robot, a robot is used to pull the machined tool out of the spindle. At the same time, another robot pulls the tool waiting in the magazine out of the magazine, and then the two exchange positions. Complete the tool change process. When there is no robot change, the tool storage direction in the magazine is parallel to the spindle, and the tool is placed at the position that the spindle can reach. When the tool is changed, the spindle box is moved to the upper position of the tool change position. The machining tool is inserted into the required space in the tool magazine by the Z-direction movement of the spindle. Then the tool to be changed in the tool magazine is transferred to the standby position. Movement, remove the tool to be changed from the magazine and insert the tool into the spindle. The system with the robot is configured in the tool magazine, and the relative position of the spindle and the number of items are flexible, and the tool change time is short.   The structure without the robot is simple, but the tool change time is long. In the automatic operation of the engraving machine, the automatic tool change operation is automatically performed by executing the tool change program. When the engraving machine is manually operated, the ATC's tool change is done manually or by MDI mode.

Our company pursues efficiency by management, survival by quality, and development by reputation, and actively improves the quality and values of products, adhering to the customer-oriented and win-win business philosophy.Our company pursues efficiency by management, survival by quality, and development by reputation, and actively improves the quality and values of products, adhering to the customer-oriented and win-win business philosophy.